Search ToolLines
Manufacturers
Categories
 | The Masonry 700 allows the operator to cut 8" and 10" blocks in a single pass - without the added hassle and effort of a foot pedal. The powerful 7.5 HP 3 phase electric motor combined with the 28" blade delivers 11" of cutting depth. It cuts through blocks, pavers, fieldstone, and pre-cast concrete with ease. The frame and cutting tray are hand fabricated heavy duty steel, while the ergonomic design allows the operator to load up the saw with a lot less effort then other saws. |
| Freight paid to a commercial address in the continental US. | Masonry 700 28" Brick, Block, Precast and Stone Saw $4299.00 |
| HP | 7.5 @ 220v |
| Blade | 28" |
| Stand | Integral rigid frame |
| Max Cut Depth | 11" |
| Max Cut Height | 18" |
| Plunge Cut | Yes |
| Protractor | Yes, included |
| Water pump | 220v, included |
| L x W x H | 45.25" x 69" x 33.5" |
| Weight | 445 lbs |
Stone and block cutting saw with an amazing 11" of cutting depth. The Masonry 700 has been used in Europe for years and is making it's debut in America in April of 2008. The Masonry 700 is ideal for cutting block, stone and various other material when depth of cut and raw power are needed. The 700 boasts a 7.5HP, 220v, 3 phase electric motor with a 220v single phase option due out in the summer of '08.
A monster 28" blade is the largest of any competitor saw in it's class. Most often, a brick and block saw with a 20 inch blade is used for stone cutting which is not a perfect condition since the stone pieces, which can weigh more than 100 pounds needs to be lifted to waist high. The 700 was designed to be of low loading height for easier placement. The extra large carriage is designed to hold massive weight as a hand shield protects the operator. Blade guard flaps provide the up-most in protection for the user as well.
A removable water pan makes cleanup easy and large casters provide ease of movement on solid ground. Spring loaded cutting head keeps the operator from fatigue when used for plunge cutting. Forklift pockets make moving this saw safe and easy with a forklift. A heavy duty water pump is used for recycling the water from the pan to the blade. 27" of horizontal tray travel is huge for a saw of this type.
Typical applications for the Masonry 700 are for stone veneer cutting from real stone, over sized retaining wall block, precast pieces, and etc. The industry has been waiting for a saw like this and now it has finally arrived. If 11" depth of cut is not enough then see our Masonry 900 for 14.5" cutting.